EXPERT FEATURES

• 360mm High-Performance Liquid Cooling: Three factory-installed P12 Pro A-RGB radiator fans and a thick 38mm radiator form a serious cooling setup for compatible gaming and creator CPUs.
• White A-RGB Build: White radiator, fans, tubes, and pump housing deliver a coordinated light-colored look with addressable lighting.
• P12 Pro Fan Performance: Three 120mm P12 Pro A-RGB fans run at 600–3000 rpm and are rated up to 77 CFM airflow and 6.9 mmH₂O static pressure per fan.
• Integrated VRM Cooling: A PWM-controlled fan in the pump module helps direct airflow to nearby motherboard voltage regulators.
• PWM-Controlled Pump: The pump operates at 800–2800 rpm, adapting its speed to the chosen PWM control signal.
• Thick 38mm Radiator: The 398 × 120 × 38mm aluminium radiator provides extra thickness for heat dissipation; confirm your case has space for the complete assembly.
• Offset Cold-Plate Mounting: ARCTIC’s mounting arrangement positions the copper cold plate closer to the processor hotspot on supported platforms.
• Intel Contact Frame: The included Intel mounting approach uses a contact frame to distribute mounting pressure on supported LGA1700/LGA1851 CPUs.
• Intel & AMD Compatibility: Officially supports Intel LGA1851/LGA1700 and AMD AM5/AM4; check motherboard and SSD-heatsink clearance before purchase.
• Flexible Fan Control: Use the all-in-one 4-pin PWM cable for synchronized control or the split cable to control the pump, VRM fan, and radiator fans separately.
• 5V Addressable RGB: Uses a 3-pin 5V A-RGB plug and socket; connect only to a compatible 5V addressable RGB header or controller, never a 12V 4-pin RGB header.
• Pre-Wired, Clean Installation: Radiator fans arrive mounted and wired, with fan cabling integrated into the tube sleeving to help keep the build tidy.
• Reinforced EPDM Tubes: 450mm tubing with braided sheathing supports routing between the processor block and the radiator.
• MX-6 Thermal Compound Included: Comes with 0.8g of ARCTIC MX-6 thermal paste for the CPU installation.