Scope for IT services
AsiaHorse Vertical GPU Mounting Bracket Kit – PCIe 4.0 x16 200mm Riser Cable, 3-Slot Steel Mount, Anti-Vibration Pads, Screws & Screwdriver | BLACK
40 $
EXPERT FEATURES
- Vertical GPU Showcase : Converts a compatible PC build from standard horizontal graphics-card mounting to a vertical presentation, putting the GPU cooler and lighting front-and-center behind the case side panel.
- PCIe 4.0 x16 Riser Connection : The included flexible 200mm riser cable connects the motherboard’s PCIe x16 slot to the vertically positioned graphics card, preserving the PCIe 4.0 x16 connection path. AsiaHorse officially offers this 20cm PCIe 4.0 x16 riser format.
- 200mm Flexible Ribbon Cable : The flexible riser gives the GPU enough routing freedom to move away from the motherboard slot and into the vertical mounting position without turning cable management into boss-level suffering.
- 3-Slot Steel Mounting Bracket : The black steel bracket uses a three-slot mounting layout designed to secure multi-slot graphics cards in a vertical orientation. The matching reference design is built for dual- and triple-slot GPU support.
- Case Compatibility Focus : The matching bracket architecture is intended for standard ATX and mid-tower layouts and similar compatible chassis, but actual installation requires sufficient rear expansion-slot, GPU-thickness, side-panel, and cooler clearance.
- 90-Degree GPU Presentation : The mounting architecture repositions the graphics card perpendicular to the motherboard so the GPU face can be displayed toward the transparent side panel instead of hiding its expensive cooling hardware.
- Anti-Vibration Foam Support : Three included adhesive foam pads can be positioned as support/contact cushions to reduce unwanted hard-surface contact and help stabilize the installed assembly.
- Complete Installation Hardware : Seven screws and a screwdriver are included, so the essential mounting hardware arrives together with the bracket instead of sending you on a side quest through the toolbox.
- Black Gaming-Build Ready : The black bracket, black riser structure, and matching accessories are made for clean black steel or contrasting showcase builds where the graphics card deserves more attention than the motherboard PCB behind it.
EXPERT SPECS
| Specification | Details |
|---|---|
| Brand | AsiaHorse |
| Product Type | Vertical GPU Mounting Bracket Kit |
| Color | BLACK |
| Primary Function | Vertically mount and display a graphics card inside a compatible PC case |
| Bracket Material | Steel |
| Bracket Color | BLACK |
| Mounting Layout | 3-slot vertical GPU mounting configuration |
| GPU Orientation | Vertical / approximately 90° relative to the motherboard |
| Riser Cable Type | Flexible PCIe graphics-card riser ribbon cable |
| PCIe Interface | PCIe 4.0 x16 |
| Riser Cable Length | 200mm / 20cm |
| Motherboard Connection | PCIe x16 motherboard slot |
| GPU Connection | PCIe x16 graphics-card connector |
| Cable Function | Extends the motherboard PCIe slot to the vertically mounted GPU |
| Reference Riser Format | AsiaHorse offers a PCIe 4.0 x16 20cm riser cable in this format. |
| Intended Chassis Type | Compatible PC cases with sufficient vertical-mounting and expansion-slot clearance |
| Reference Case Compatibility | Matching bracket design is intended for standard ATX / mid-tower layouts; fit must still be checked against the individual chassis and GPU dimensions. |
| GPU Size Support | Designed around multi-slot graphics-card mounting; matching reference architecture supports dual- and triple-slot GPUs. |
| Adhesive Pads | 3 foam support / anti-vibration pads |
| Screws | 7 included |
| Screwdriver | 1 included |
| Kit Contents | BLACK steel vertical GPU bracket, PCIe 4.0 x16 200mm riser cable, 3 adhesive foam pads, 7 screws, screwdriver |
| GPU Included | No |
| PSU Power Extension Cable Included | No |
| 12+4-Pin / 3×8-Pin Power Cable | Not included; the previously mentioned PSU cable specification does not apply to this kit |